Concrete Inspection & Testing Services
CCIL-certified Concrete Laboratory - Type Q (CSA A23.2-1C, 3C, 4C, 5C, 9C and 17C; with Additional Tests: 8A, 1B, 6B, 3C, 8C, 11C, 14C, 16C, 19C and 20C); Concrete Aggregate Certification - Type R (CSA A23.2-1A, 2A, 3A, 4A, 5A, 6A, 7A, 10A, 12A and 13A; with Additional Tests: 11A, 25A and 4B); Advanced Concrete Certification - Type S (CSA A23.2-8A, 2C, 6C and 11C; with Additional Tests: 10C, 12C, 13C, 18C, 21C, 22C, 23C, 26C and ASTM C457)
CCIL-certified Aggregate Laboratory - Aggregate Quality Control Laboratory (Type C) - LS-600, LS-601/C117, LS-602, LS-607, LS-608, LS-621; Aggregate Physical Property Tests (Type D) - LS-412, LS-610/C40, LS-613, LS-617
MTO-approved Laboratory - Hardened Air Void System, Rapid Chloride Permeability, Chloride Content, Compressive Strength, UHPFRC, Salt Scaling, Grout Testing, Linear Shrinkage & Tensile Bond Strength
Concrete Testing
CCIL-certified Concrete Laboratory - Type Q (CSA A23.2-1C, 3C, 4C, 5C, 9C and 17C; with Additional Tests: 8A, 1B, 6B, 3C, 8C, 11C, 14C, 16C, 19C and 20C); Concrete Aggregate Certification - Type R (CSA A23.2-1A, 2A, 3A, 4A, 5A, 6A, 7A, 10A, 12A and 13A; with Additional Tests: 11A, 25A and 4B); Advanced Concrete Certification - Type S (CSA A23.2-8A, 2C, 6C and 11C; with Additional Tests: 10C, 12C, 13C, 18C, 21C, 22C, 23C, 26C and ASTM C457)
Laboratory Testing
CCIL-certified Aggregate Laboratory - Aggregate Quality Control Laboratory (Type C) - LS-600, LS-601/C117, LS-602, LS-607, LS-608, LS-621; Aggregate Physical Property Tests (Type D) - LS-412, LS-610/C40, LS-613, LS-617
MTO-approved Laboratory - Hardened Air Void System, Rapid Chloride Permeability, Chloride Content, Compressive Strength, UHPFRC, Salt Scaling, Grout Testing, Linear Shrinkage & Tensile Bond Strength
Concrete Plant Inspections
Performs Ready Mix Concrete Plant Facility Audits & Sub-contracted Ready Mixed Concrete Truck Certification, as per Concrete Ontario guidelines
Concrete Coring
Ground penetrating radar (GPR) imaging and scanning
CONSTRUCTION MATERIALS ENGINEERING
Bridge Check Canada Ltd. offers complete materials quality control and quality assurance testing and inspection services on newly constructed projects. Comprehensive field and laboratory test procedures assure reliable and economical construction materials control. In-place testing methods are used in conjunction with maturity testing to derive expeditious, accurate curing data, thus facilitating fast-track construction schedules.
- Engineering investigations
- Materials engineering design and review
- Construction materials testing and inspection
- Forensic evaluations
- Quality control research and development
- Durability analysis and studies
- Damage, deterioration and failure analysis
- Expert testimony in the field of concrete deterioration
- Early-age strength development – maturity meter modelling and monitoring for early formwork removal
- Non-destructive testing including surface absorption testing, Schmidt hammer testing and covermeter surveys
- RMCAO (Concrete Ontario) Approved Auditor for concrete production facilities, delivery vehicle certification and sub-contracted ready mixed concrete truck certifications
- Aggregate Recycling Ontario (ARO) Approved Auditor
- Registered with the Ministry of Transportation (MTO) to carry out Quality Oversight Audit & Inspection – Prestressed/Precast Concrete Production Facilities under Registry, Appraisal & Qualification System (RAQS) regulations.
CONSTRUCTION SUPPORT SERVICES - INSPECTION & TESTING
Our aim is to combine advanced technologies with hands-on-experience to customize our services to the routine or unique requirements of each project. The end product in construction depends on the quality of materials, construction practices and the level of care and quality control in the construction process. The inspection and testing services provided by Bridge Check Canada Ltd. are directed at enhancing the quality and value of construction projects.
- CCIL Category II+ certified concrete laboratory, including additional tests CSA A23.2-1B, 4B, 6B, 3C, 8C, 10C, 13C, 16C, 18C, 20C, 21C, 22C, 23C and ASTM C457
- MTO-approved laboratory for hardened air void analysis, chloride content, rapid chloride permeability and compressive strength testing.
- Construction materials specification and QA/QC compliance testing and inspection – concrete and aggregates (CCIL-certified technicians)
- Linear shrinkage, hardened air void analysis, chloride ion content and rapid chloride permeability testing
- Shotcrete testing, including panel sampling and on-site placement monitoring
- Full range of self-consolidating concrete testing and inspection services
- In-situ materials evaluation, including concrete maturity testing and temperature modelling
- Tensile bond strength of concrete and overlays
- Dowel pull-out testing
- Post-tensioned grouting inspection and testing
- Concrete coring
- Crack monitoring inspection
- Surface Resistivity Testing
Contact Us
200 Viceroy Road, Unit 4, Vaughan, ON L4K 3N8, Canada
Tel: 905-660-6608 | Fax: 905-660-6609
